ViewSonic Tab Flash File[[MT6572 V4.4.2]]1000%Tested Firmware Without Password

 

MT8127_NAND_alps__A701E__A701E__4.4.2__A701E_20141219

    

 

 

 

  FREE DOWNLOAD

 

 

 

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8127
BB_CPU_NME : [MediaTek] MT8127_S00
BB_CPU_EXT : 0xCA04 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8D
NAND Flash : 009800DE009400930076005000080000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x005A , NAND_UNKNOWN
[NAND] : FLASH_DIE : 0098 00DE 0094 0093 0076 0050 0008
[NAND] : FLASH_LEN : 0x200000000
[NAND] : FLASH_EXT : 4000/0100/01
DEV RID    : 0x2BCD2EE22171ED0F9625E88B3B94CDCD
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_a701e.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT8127 / V1.1.1 / a701e / NAND
FW Size : 659 MiB

Brand     : alps
ProdName  : A701E
ProdModel : A701E
Device    : A701E
AndroidVer: 4.4.2
MTKxCPU   : MT8127
MTKxPRJ   : A701E_20141219

Android Info saved

Scatter saved to : F:\Faash\viewsonic\MT8127_NAND_alps__A701E__A701E__4.4.2__A701E_20141219

Done!
Elapsed: 00:20:54
Reconnect Power/Cable!

 

How to Flash Stock Firmware ROM (Flash File)Step

 1: Download and extract the firmware on your computer.Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.Step 3: Install the USB Drivers (skip if drivers are already installed).Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.Step 5: Connect your Smartphone to the computer using the USB Driver.Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.Step 7: Green Ring will appear at the end of successful Flash.