HUAWEI Y360-U31 Flash File[[MT6582-V4.4.2]]-1000% Tested Firmware-Gsm Rana

 

MT6582__HUAWEI__HUAWEI_Y360-U31__HWY360-U__4.4.2__ALPS.KK1.MP1.V2.10

 

    

 

 

100%Tested By_Gsm Rana

 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D30344740ED5D93AC520D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D30344740ED5D93AC520D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xA35205BF49B5BB344186E0EA01DA9E24
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : HUAWEI
ProdName  : Y360-U31
ProdModel : HUAWEI Y360-U31
Device    : HWY360-U
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_wt98360.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : global_cust.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / wt98360 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1376 MiB
Scatter saved to : C:\Users\rana\Documents\MT6582__HUAWEI__HUAWEI_Y360-U31__HWY360-U__4.4.2__ALPS.KK1.MP1.V2.10\

All done!

Done!
Elapsed: 00:09:58
Reconnect Power/Cable!

How to Flash Stock Firmware    
Step1: Download and extract the firmware on your computer.     
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.    
Step 3: Install the USB Drivers (skip if drivers are already installed).      
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.     
Step  5: Connect your Smartphone to the computer using the USB Driver.    
 Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.     
Step 7: Green Ring will appear at the end of successful Flash.